8-30
Setup and Registration (System Menu) > System Menu
Item Description
IPv6 Settings
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [
TCP/IP
] is [
On
].
IPv6
Select whether to use IPv6.
Value: Off, On
Selecting [
On
] displays IP address in [
IP Address (Link Local)/Prefix Length
] after restarting
the network.
Manual Setting
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
This function is displayed when [
IPv6
] is set to [
On
].
To enter [
Default Gateway
], set [
RA (Stateless)
] to [
Off
].
RA (Stateless)
Select whether to use RA (Stateless).
Value: Off, On
This function is displayed when [
IPv6
] is set to [
On
].
Selecting [
On
] displays IP address in [
IP Address (Stateless)/Prefix Length
] after restarting
the network.
DHCP
Select whether to use the DHCP (IPv6) server.
Value: Off, On
This function is displayed when [
IPv6
] is set to [
On
].
Selecting [
On
] displays IP address in [
IP Address (Stateful)/Prefix Length
] after restarting the
network.
Bonjour
Select whether or not to use Bonjour.
Value: Off, On
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
