10-26
Troubleshooting > Troubleshooting
System error.
— System error has occurred. Follow the
instructions on the screen.
—
T
The cover is open.
Is the top cover of the document
processor open?
Close the document processor cover. ―
Is there any cover which is open? Close the cover indicated on the screen.
The slit glass requires
cleaning.
— Clean the slit glass using the cleaning
cloth supplied with the document
processor.
page 10-3
This memory is not
formatted.
Is the removable memory formatted by
this machine?
Perform [
Format
] on this machine. page 7-11
This user account is
locked out.
— Contact administrator.
Job is canceled. Select [
End
].
—
Toner [C][M][Y][K] are
empty.
— Replace the toner container to our
specified toner container.
If the color toner is empty but the black
toner is remained, the machine
continues printing in black and white by
selecting [
Print in Black and White
] of
Color Toner Empty Action.
page 10-4
Toner is low. [C][M][Y][K]
(Replace when empty.)
— It is almost time to replace the toner
container. Obtain a new toner container.
―
U
Unknown toner installed.
Is the installed toner container our own
brand?
We will not be liable for any damage
caused by the use of third party supplies
in this machine.
―
Unknown Toner Installed.
PC [C][M][Y][K]
Does the installed toner container's
regional specification match the
machine's?
Install the specified container. ―
W
Warning low memory.
— Cannot start the job. Try again later. —
Waste toner box is full.
Is the waste toner box full? Replace the waste toner box. page 10-7
Waste toner box is not
installed.
— The waste toner box is not installed
correctly. Set it correctly.
page 10-7
Y
You cannot use this box.
— You cannot use the specified box. Job is
canceled. Select [End].
—
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details on Auto
Error Clear, refer to the following:
Auto Error Clear (page 8-41)
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
