Item No. Description
No. Description Supplement
(64) Media type attributes
1 to 28 (Not used: 18, 19, 20)
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
7: Extra Heavy
(65) Calibration information Black/Cyan/Magenta/Yellow
(66) Calibration information -
(67) Calibration information -
(68) Calibration information -
(69) Calibration information -
(70) Calibration information -
(71) Calibration information -
(72) Calibration information -
(73) Calibration information -
(74) Calibration information -
(75) RFID information -
(76) RFID reader/writer version infor-
mation
-
(77) Color table version for printer -
(78) Color table 2 version for printer -
(79) Color table version for copy -
(80) Color table 2 version for copy -
(81) Maintenance information -
(82) Altitude 0: Standard
1: High altitude 1
2: High altitude 2
(83) Charger roller correction 1 to 5
(84) Configuring toner coverage
counters
0: Full-color count display
1: Color coverage count display
(85) Low coverage setting 0.1 to 100.0
(86) Middle coverage setting 0.1 to 100.0
(87) Toner low setting 0: Enabled
1: Disabled
(88) Toner low detection level 0 to 100 (%)
To Next Page
Loading...
