Kyocera TASKalfa 3550ci - 1-6-2 Remarks on main PWB replacement

2LK/2LN/2LM/2LC
1-6-2
1-6-2 Remarks on main PWB replacement
When replacing the main PWB, remove the EEPROM (YC14) and code DIMM (YS4) from the main PWB that
has been removed and then reattach it to the new main PWB.
Figure 1-6-2
When refitting DIMM, check "CODE" and "FLS" marked on the PWB and refit them to the original positions.
Figure 1-6-3
YC14
EEPROM
Main PWB
CODE FLS
YS4
YS3
Main PWB
DIMM