Kyocera TASKalfa 3550ci - 1-5-4 Image formation section; (1) Detaching and refitting the inner unit

2LK/2LN/2LM/2LC-2
1-5-34
1-5-4 Image formation section
(1) Detaching and refitting the inner unit
Procedure
1. Open the front cover.
2. Remove all toner container each.
3. Remove the waste toner box tray by lift-
ing upwards and from the right side.
Figure 1-5-57
4. Remove the screw and then open the
connector cover.
5. Remove the connector.
6. Remove four fixed screws of inner unit.
Figure 1-5-58
2
1
Waste toner
box tray
Connector cover
Screw
Screw
Screw
Screw
Connector
Screw
Inner unit
Inner unit