Kyocera TASKalfa 3550ci - (2) Detaching and refitting the transfer belt unit

2LK/2LN/2LM/2LC-2
1-5-41
(2) Detaching and refitting the transfer belt unit
Procedure
1. Remove the paper conveying unit (see
page 1-5-39).
2. Remove the fuser unit (see page 1-5-
45).
3. Remove the connector.
Figure 1-5-67
4. Pull out the transfer belt unit by lifting up
both ends.
Figure 1-5-68
Connector
Transfer belt unit