Kyocera TASKalfa 3550ci - Page 125

2LK/2LN/2LM/2LC-2
1-3-31
U030 Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
*: 45 ppm/55 ppm model only.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Feed Paper feed motor (PFM) is turned on
DLP(K) Developer motor K (DEVM-K) is turned on
DLP(CMY) Developer motor MCY (DEVM-MCY) is turned on
Fuser Fuser motor (FUM) is turned on
SB(CW) Eject motor (EM) is turned on clockwise
SB(CCW) Eject motor (EM) is turned on counterclockwise
CMY Release Color release motor (CRM) is turned on
Job Separator JS eject motor (JSEM) is turned on
Regist* Registration motor (RM) is turned on
Bridge1 Bridge conveying motor 1 (BRCM1) is turned on
Bridge2 Bridge conveying motor 2 (BRCM2) is turned on
Belt Meand Transfer motor (TRM) is turned on
Press Release Transfer release motor (TRRM) is turned on
Fuser Release Fuser release motor (FURM) is turned on
DU1 Duplex motor 1 (DUM1) is turned on
DU2 Duplex motor 2 (DUM2) is turned on
Mid Roller* Middle motor (RM) is turned on