Kyocera TASKalfa 3550ci - Page 129

2LK/2LN/2LM/2LC-2
1-3-35
U034 Adjustment: Leading edge registration adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
[LSU Out Top]
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
[LSU Out Top B/W] [LSU Out Top 3/4]
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Item No. Description
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
MPT Half(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette(L) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Cassette
Half(L)
Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Duplex(L) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Duplex
Half(L)
Duplex mode (second) -3.0 to 3.0 0 0.1 mm
MPT(S) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
MPT
Half(S)
Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette(S) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Cassette
Half(S)
Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Duplex(S) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Duplex
Half(S)
Duplex mode (second) -3.0 to 3.0 0 0.1 mm
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT(L) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette(L) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Duplex(L) Duplex mode (second) -3.0 to 3.0 0 0.1 mm
MPT(S) Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette(S) Paper feed from cassette -3.0 to 3.0 0 0.1 mm
Duplex(S) Duplex mode (second) -3.0 to 3.0 0 0.1 mm