Kyocera TASKalfa 3550ci - Page 140

2LK/2LN/2LM/2LC-2
1-3-46
U053 Setting: [Motor4]
1. Select the item to be adjusted.
*: 55 ppm model only.
Setting: [Motor5]
1. Select the item to be adjusted.
Setting: [Motor6]
1. Select the item to be adjusted.
Item No. Description
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
Drum B/
W(K)*
Drum motor K (DRM-K) in
black/white mode
-5000 to 5000 - - - 0
Drum
Mono(K)
Drum motor K (DRM-K) in
monochrome mode
-5000 to 5000 42 36 28 22
Display Description
Setting
range
Initial
setting
Dev B/W(K)
Developer motor K (DEVM-K) in black/
white mode
-5000 to 5000 0
Trans Belt B/W Transfer motor (TRM) in black/white
mode
-5000 to 5000 0
Regist B/W Registration motor (RM) in black/white
mode
-5000 to 5000 0
Belt Clean B/W Transfer cleaning motor (TRCM) in
black/white mode
-5000 to 5000 0
Display Description
Setting
range
Initial
setting
SB B/W Eject motor (EM) in black/white mode -5000 to 5000 -27
Fixing B/W Fuser motor (FUM) in black/white
mode
-5000 to 5000 0
Bridge1
B/W
Bridge conveying motor 1 (BRCM1) in
black/white mode
-5000 to 5000 -41
Bridge2
B/W
Bridge conveying motor 2 (BRCM2) in
black/white mode
-5000 to 5000 -46
Feed B/W Paper feed motor (PFM) in black/white
mode
-5000 to 5000 0
Job Separator B/
W
JS eject motor (JSEM) in black/white
mode
-5000 to 5000 0
Mid Roller B/W Middle motor (MM) in black/white mode -5000 to 5000 0
DU1 B/W Duplex motor 1 (DUM1) in black/white
mode
-5000 to 5000 -40
DU2 B/W Duplex motor 2 (DUM2) in black/white
mode
-5000 to 5000 -40