2LK/2LN/2LM/2LC-2
1-3-64
U074 DP input response adjustment
Description
Sets the density correction for scanning originals from the DP.
Purpose
Modify the setting only if a spotted background appears when a bluish original or a document
with a background that is slightly colored is scanned from the DP.
Perform adjustment if the page scanned using the table and the page scanned using DP do not
match.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Settings 0: No correction / 1: Slight correction / 2: Medium correction / 3: Strong correction
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Setting
range
Initial
setting
Coefficient Compensating original document scan-
ning density
0 to 3 1
To Next Page
Loading...
