2LK/2LN/2LM/2LC-2
1-2-17
7. Make test copies.
If image quality is unsatisfactory after test copying, execute Color Calibration, then retry U410-Adjusting
the halftone automatically.
8. Setting the delivery date (see page 1-3-141)
Enter 278 using the numeric keys and press the start key.
Select [Today].
Press the start key. The delivery date is set.
Press the stop key to exit.
9. Output status report
Enter 000 using the numeric keys and press the start key.
Select [Maintenance].
Press the start key. A status report is output.
Press the stop key to exit.
10. Enter 001 using the numeric keys and press the start key.
The machine exits the maintenance mode.
Completion of the machine installation
To Next Page
Loading...
