2LK/2LN/2LM/2LC
1-5-28
16. Remove the screw.
17. Unhook four hooks and then remove
the LSU relay PWB cover.
Figure 1-5-47
18. Remove all the connectors and the FFC
connectors with a lock.
(30ppm model/35ppm model has the
FFC connector without a lock.)
*: When remove the FFC from the FFC
connector with a lock, removing it after
release the lock by lifting the lock lever
up.
19. Remove the electric wire from the elec-
tric wire support portion.
20. Remove the FFC from the FFC support
potion.
Figure 1-5-48
LSU relay PWB cover
Screw
Hooks
Hooks
Connector
FFC
FFC connector *
with a lock
*: 30ppm/35ppm is FFC connector without the lock.
FFC support portions
Electric wire
support portion
To Next Page
Loading...
