Kyocera TASKalfa 3550ci - Page 481

2LK/2LN/2LM/2LC
1-5-63
8. Remove four screws.
Figure 1-5-100
9. Pull the operation panel unit upward.
10. Release three wire saddles.
11. Remove four connectors from the oper-
ation PWB.
12. Remove the operation panel unit.
Figure 1-5-101
Screws
Screws
Waire saddles
Connector
Operation panel unit
Operation
panel unit
Connectors
Connector
Wire saddle
Operation PWB