2LK/2LN/2LM/2LC-2
1-2-37
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Pull the paper conveying unit out.
3. Remove two screws and then remove
the ISU right cover.
4. Remove the screw and five hooks and
then remove the right upper cover.
Figure 1-2-47
5. Remove seven screws and then
remove the rear upper cover.
Figure 1-2-48
ISU right
cover
Screws
Right upper cover
Screw
Right
upper cover
Hooks
Hook
Hook
Rear upper cover
Screws
Screws
Screw
Screws
To Next Page
Loading...
