2 FAXING FROM CLIENT COMPUTERS
10 How to Fax using the N/W-Fax Driver
5
When you select the [Sender Information] option in the [Cover Sheet] tab, click the
[Sender Information] tab and enter the sender information message to appear on the
fax cover sheet.
In the text box in the [Sender Information] tab, you can enter up to 500 characters.
For instructions on how to set the Sender Information, see the following section.
P.23 “Setting up the Sender Information properties”
6
Click [OK] to save the settings.
7
Click [OK] to send a document.
y You can monitor and manage the fax job that is sent from your computer using COMMAND CENTER.
y [OK] is displayed instead of [Print] in the print dialog box depending on an application.
When you use the N/W-Fax driver to send a fax job, check whether the job has been successfully sent on the
“Logs - Transmission” screen in COMMAND CENTER.
To Next Page
Loading...
