Kyocera TASKalfa 820 - Page 18

Scanner Settings
1-12
Original Image
Set the image quality for default settings mode. The setting items are as follows.
For further details on original image, see page 1-6.
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select Original Image and press [Change #].
3
Select [Text+Photo], [Photo], [Text] or [for OCR].
4
Press [Close]. The display returns to the Setting default function screen.
File Format
Configure the file format for default settings mode. The setting items are as follows.
For further details about File Format, see page 1-5.
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select File format and press [Change #].
3
Select File Format.
4
Press [Close]. The display returns to the Setting default function screen.
Scan Resolution
Set the scan resolution for default settings mode. Specify scan resolutions of 200 dpi, 300 dpi,
400 dpi or 600 dpi.
For further details on scanning resolution, refer to page 1-4.
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select Scan Resolution (Scanning Resolution) and press [Change #].
3
Select [200dpi], [300dpi], [400dpi] or [600dpi].
4
Press [Close]. The display returns to the Setting default function screen.
Item Description
Text+Photo When scanning originals with mixed text and photos.
Photo To reproduce depth of photo originals.
Text To clearly reproduce penciled or fine lines.
for OCR For use with OCR applications (software to convert optical characters to text
data).
Item Description
PDF Configures PDF.
TIFF Configures TIFF.