Kyocera TASKalfa 820 - Setting Scanner Functions

Scanner Settings
1-2
Setting Scanner Functions
This section explains how to configure the scanner functions from the machine.
NOTE: Refer to each scanner function operation procedure as explained in Scan System (H)
Operation Guide Set up Edition for information how to display the scanner function settings screen.
The available settings may vary depending on the sending method.
The following settings are available from the scanner function screen’s [Basic] tab.
• Select Original Size...1-3
• Select Sending Size...1-3
• Selecting Original Orientation...1-4
• Scan Resolution...1-4
• File Name Entry...1-5
• File Format...1-5
Ready to scan.
Address
Sending
Size
Scan
Resolution
File
CancelScan to PC-Continuous TX
Original
Size
Original
Orient.
File Name
Single Scan
Delete
Save at
User PC
Destination
Place the original and select destination.
Basic Quality Edit
Auto size 300dpi
Auto Top Edge Top
PDF
Auto
10/10/`08 10:10
Original
A4
Send
A4
Group A
Group B
User A
Book
Format
Entry