Kyocera TASKalfa 820 - Page 20

Scanner Settings
1-14
Full scan
Configure Full Scan for default settings mode. the setting items are as follows.
For further details about Full scan, see page 1-9.
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select Full scan and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The display returns to the Setting default function screen.
Centering
Configure Centering for default settings mode. The setting items are as follows.
For further details about Centering, see page 1-10.
1
Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default
function screen.
2
Press [] or [] to select Centering and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The display returns to the Setting default function screen.
Item Description
On Enables Full scan.
Off Disables Full scan.
Item Description
On Enables Centering.
Off Disables Centering.