Setting Scanner from a Web Browser
2-3
Page not found. error is displayed
• The machine has not finished booting or rebooting.
Please try again later.
Access forbidden XXX error is displayed
• The machine is in use.
Try again after verifying that the scanner operation is complete and the display has returned to
the startup screen.
Using the Web Page Feature
1
Launch the Web browser software.
2
Enter the scanner IP address or hostname into the address bar and press the Enter key on the
keyboard.
3
The Web page feature top page is displayed.
4
If a password has been set, a dialog box appears when
clicking on System Basic Settings on the left side of
the page. Enter the password and press the OK button.
To Next Page
Loading...
