Included Scanner Tools
3-17
Enter Password (scanner connection)
The administrator password is required to read scanner settings and information when connecting
to a scanner.
NOTE: Set the administrator password according to Setup - Administrator on page 2-7 (Web
browser) or Set Password on page 3-19 (Address Editor).
Start Searching
Button
Begins searching for scanners.
Scanner Address Click the search result list to show the scanner address.
You can skip searching and select a scanner address that was discovered
previously from the drop down menu.
You can directly enter the scanner address.
Start Editing
Button
Connect to the selected scanner and begin editing the specified scanner data.
Hostname will not be shown for a scanner that was in use when search was
performed.
Item Description
Item Description
Scanner Address Shows the IP address of the connected scanner.
Password Enter the administrator password for the connected scanner.
To Next Page
Loading...
