3-75
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
85
Push in the horizontal transport unit.
86
Re-attach the covers and put back the cassettes. These screws are used in Step 34 ,
in Step 35, in Step 65 and in Step 66.
87
Put seal blower duct [A].
(a) 13±3 [mm]
(b) 13±3 [mm]
(c) 25±3 [mm]
88
Put cover filter assy [A] as arrow mark side up.
• If PF-9110 installation is not completed then skip step86 to step88.
• It is possible that start 550-sheet Multipurpose Tray Kit (PF-9110) installation first (Step109) and back to
Bridge Kit for Paper Feeder (AK-9130) installation (Step90).
To Next Page
Loading...
