Kyocera Taskalfa Pro 15000c - Page 273

3-195
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
163
Close the front lower cover [A] (Screw x1). Screw was removed in step 152.
164
Pull the lock frame [A] (Screw x1). The screw will use in step 164.
165
Connect DF-9100 to AK-9120.
NOTE
• The front lower cover [A] does not need to be secured with screw in case that BF-9110 has installed.
[A]
[A]
[A]
DE-9100
DF-9100