Kyocera Taskalfa Pro 15000c - Page 292

3-214
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
8
Bundle wires [A] of punch unit and fix with edging [B] of motor unit.
9
Hang 2 hooks [B] of punch PWB [A] to cut off part [C] of DF-9100. Secure punch PWB
[A] and ground line [D] of punch unit with one screw (Screw x1: M3x8).
10
Connect 6 wires from punch unit to connector [B] on punch PWB [A].
[A]
[B]
[A]
[A]
[B]
[C]
[D]
[A]
[B]
[B]