6-15
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
6
The number of clogged nozzle come up by scanning the chart.
7
Remove the front paper width guide [A] in the direction of the arrow. (Screw x1)
8
Remove the rear paper width guide [B] in the direction of the arrow. (Screw x1)
9
Release 2 hooks [B] from the main unit [C], and then remove the right exit tray [A] in
the direction of the arrow.
When ink non-ejection has occurred
Ink ejection confirmation chart
To Next Page
Loading...
