29
Control Output .......................................... The number of points: 3 (HIGH, OK, and LOW)
Output mode: Open collector (NPN)
Load capacity: 30 VDC, 20 mA (Resistance load)
Pattern function: Set 4 sets of high/low limit value,
Selectable from external signal
High/Low limit comparator function:
The number of points: 2 (HGH and LOW)
Setting range: ±9999
Comparison speed: 50 times/sec
Detector function:
The number of point: 1 (OK)
Analog Output ........................................... Select voltage output or current output
Voltage output: ±10 V (Load resistance 2k ohm or more)
Arbitrarily scaling available
Current output: 4 to 20 mA (Load resistance 500 ohm or
less)
Arbitrarily scaling available
Response speed: Approx. 0.25 sec (10 to 90%)
Non-linearity: Within ±0.1% FS
Frequency response: Approx. 1 Hz (-3dB±1dB)
TEDS Function ......................................... Automatic sensitivity registration (Key operation, When power
ON, RS control)
Power Supply ............................................ AC power supply: 100 to 240 VAC , 50/60 Hz
Power consumption 6 VA or less
DC power supply: 10 to 30 VDC
Power consumption 8 W or less
Operating Temperature and
Humidity Range …..…………...-10 to 50 °C, 20 to 85% (Non-condensing)
Dimensions ............................................... 96(W) × 48(H) × 144(D) mm
Panel cut dimensions……………………….92.2 (W) × 45.2 (H) mm,
Panel thickness 0.8 to 5.0 mm recommend
Weight ....................................................... Approx. 300 g (Standard type)
Accessories ................................................. Unit seal, Instruction manual, Product warranty
Compliance ................................................. Directive 2014/30/EU (EMC)
Directive 2014/35/EU (LVD)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS)
0
+0.4
+0.4
0
To Next Page
Loading...
