L-Acoustics LS10 - Using the Switch Configuration Tool

Operation
Using Switch Conguration Tool
Introduction
LS10 can be remotely congured using the Switch Conguration Tool application. The application is available from
the main menu of LA Network Manager version 3.1.0 minimum.
The Switch Conguration Tool allows to congure the connected LS10 with the following parameters:
• display and change the IP address
• update the rmware to the latest version
• check the status of the switch and the ports
• customize the switch options (RSTP, gPTP, Error Auto Recovery)
• dene the fault conditions to include in the GPO (General Purpose Output Logic)
• retrieve the embedded log les when required
• reset to factory default settings if necessary
LS10 owner's manual (EN) version 1.0 25