3. Grounded, cord-connected tools intended for use on a supply circuit having a nominal
rating of 150–250 volts, inclusive:
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated
in Sketch D. The tool has a grounding plug that looks like the plug illustrated in Sketch D.
Make sure the tool is connected to an outlet having the same configuration as the plug. No
adapter is available or should be used with this tool. If the tool must be reconnected for
use on a different type of electric circuit, the reconnection should be made by qualified
service personnel; and after reconnection, the tool should comply with all local codes and
ordinances.
Below is a link and QR code to a DP20 video showing features and operation information. It is a
great way to familiarize the unique features and capabilities of this new era of drill press
offerings from Laguna Tools. Copy the URL or scan the QR code.
www.lagunatools.com/classic/drill-presses/dp20/
10
To Next Page
Loading...
