8
1 • GENERAL WARNINGS
• If technical assistance is required, all information included
in the ID plate must be provided, as well as detailed
information about the fault so as to make it easier for the
help service to understand and resolve the problem.
• Ask the installer for instructions about the correct
management of water softener, as insufficient or poor
maintenance is the main reason for the formation of limescale
that is detrimental to the device.
• The room where the oven is installed must be well-
ventilated!
• Each oven is equipped with an ID plate that states the oven
model and its main technical features. Following is an example
of an electric oven plate and a gas oven plate.
• This manual is also available in an electronic format.
Contact your help service.
0085
2010
EN 203/A1 AC 230V 50Hz
IT
IPX 5
G 25 / m
3
/h
Qn 40 kW
Cat.
II 2H3+
NR XXXXXXXXXX
kPa
200 - 500
P mbar
20; 28-30/37
TOT 1 kW1 x 0.55 kW
G 20 / m
3
/h
G 30 3.16 Kg/h
Pmax / mbar Pmax / mbar
Pmin / mbar Pmin / mbar Pmin / mbar
A3 B13 B23
To Next Page
Loading...
Need help?
General