4
1 Important Information about the Manual
1 Important Information about the Manual
1.1 Purpose/Applicability of the Document
These instructions facilitate the safe and efficient handling of the flame monitor consisting of
the evaluation device F130l and the approved flame sensors in the flame sensors chapter 4.2
Flame Sensors
The specifications in the document refer to the following device version:
• SW: 1.2.0.0
• HW: 1.0.0.0
If you utilise a different version, this can lead to other effects to your device than those de-
scribed here.
The flame monitor F130I complies with the following standards and directives:
• DIN EN 298:2012
• DIN EN 60730-2-5:2015
• DIN EN 50156:2016, chapter 10.5
• DIN EN 746-2:2011 (Industrial thermoprocessing equipment – Part 2: Safety requirements
for combustion and fuel handling systems)
• DIN EN 61508:2011, Ed.2 Part 2 (Requirements SIL 3)
• DIN EN 60730-1:2012
• DIN EN 50581:2013
• 2014/68/EU (Pressure Equipment Directive)
• 2009/142/EC (Gas Appliances Directive)
• EU/2016/426 Gas Appliance Regulation (GAR)
• 2014/35/EU (Low Voltage Directive)
• 2014/30/EU (EMC Directive)
• 2011/65/EU (RoHS2 Directive)
• UL372 (in preparation)
1.2 Safekeeping of the Manual
Look after the manual and all the associated documents carefully.
The manual is part of the product and must be kept safe and be accessible to personnel at all
times.
Moreover, it is important that the manual:
• Is available when required.
• Is kept for the entire service life of the device.
• Is available to its next operator.
To Next Page
Loading...
