16
3 Product Description
Installation/de-installation of FFS08 with the FS60-00 bracket
Installation of FFS08 with FS60-00 bracket
1. Turn bracket on burner approx. 20° to the left up to the stop and fasten both screws (1).
2. Insert the flame sensor in the bracket and position it to the flame optimally. Fasten the
flame sensor with clamping screw.
Fig. 3-6 Bracket installation FS60-00
De-installation e.g. for maintenance/cleaning:
1. Loosen screws (1), and remove bracket from burner by turning bracket with fixed flame
sensor approx. 20° to the right.
2. For installation according to maintenance, mount in reverse order, turn brackets to the left
up to a stop and fasten both screws(1).
The initial position of the flame sensor installation position is restored.
To Next Page
Loading...