154
When a combined function is set, if
a button is pressed the main func-
tion of the button pressed is activat-
ed, together with those already set. If
the button corresponding to a func-
tion which is already on is pressed,
such function will be cancelled (the
related led turns off).
Press the AUTO button to restore
air distribution control after a man-
ual setting.
When the driver selects the air dis-
tribution to the windscreen, also the
passenger side air flow is automati-
cally directed to the windscreen.
Anyway, the passenger can select
another air distribution pattern, by
pressing the related buttons.
Buttons for adjusting rear air
distribution (6, 9 fig. 122)
When the back control panel is
activated, it is possible to set one of
the three air distribution patterns for
the passenger compartment back
area by pressing the related buttons:
D Air flow to back central vents.
S Air flow to rear footwells. This air
distribution pattern, due to the nat-
ural tendency of heat to move
upwards, offers a prompt feeling of
warmth to the coolest parts of the
body.
S
D
Air flow shared between rear
footwell vents (warmer air) and cen-
tral rear vents (cooler air).
Air distribution setting is displayed
when leds relevant to the selected
button are lit, which will be turned
off in case of fully automatic opera-
tion (FULL AUTO).
When a combined function is set, if
a button is pressed the main func-
tion of the button pressed is activat-
ed, together with those already set. If
the button corresponding to a func-
tion which is already on is pressed,
such function will be cancelled (the
related led turns off).
Press the AUTO button to restore
air distribution control after a man-
ual setting.
To Next Page
Loading...
