Main Copier Unit
Specifications 7 - 3
Power requirements:
• 120VAC, 60 Hz, 10 amp.
Power consumption:
Mainframe only
• Warm up: 880 W
• Stand-by: approximately 125 W
• Copying: 450 W
• Maximum: 1100 W
Full system
• Warm up: 890 W
• Stand-by: approximately 125 W
• Copying: 450 W
• Maximum: 1200 W
Dimensions (W x D x H up to exposure glass):
• 21.65"× 22.36"× 20.39"
Noise Emission (ISO7779 Sound Power Level):
Based on actual measurement
Mainframe only:
• Copying: 60.1 dB (A)
• Stand-by: 40 dB (A)
Complete system:
• Copying: 67.5 dB (A)
• Stand-by: 40 dB (A)
Weight:
•88.16 lb.
Note: Specifications are subject to change without notice.
To Next Page
Loading...