Lanier 5618 - Setting Non-Standard Size Paper

Changing Paper Size
Service and Supplies 6 5
Setting Non-Standard Size Paper
1
Press the Select Paper Tray key to select the second paper tray.
2
Then press the # key.
3
Press the Cursor keys until the paper size you want to use is displayed.
When the Paper Size Require is Displayed
Press the OK key.
When the Paper Size Required is not Displayed
You can also specify the tray size with the User Tools.
1. Press the Cancel key, then press the Right Cursor key to display
“Custom Size”.
2. Enter the horizontal size then press the OK key.
3. Enter the vertical size then press the OK key.
4
Press the OK key.