Lantronix CoBox-Micro

Supplemental Information Setup Records
E-13
Note: See Binary to Hexadecimal Conversion on page E-18 for more
information on converting binary values to hexadecimal format.
Pack Control
Alternate packing algorithm settings are enabled in Flush Mode. Use the following table to
select Pack Control options:
Note: See Binary to Hexadecimal Conversion on page E-18 for more
information on converting binary values to hexadecimal format.
Table E-12: Pack Control Options
Option Bit76543210
Idle Time
Force transmit: 12ms 0 0
Force transmit: 52ms 0 1
Force transmit: 250ms 1 0
Force transmit: 5sec 1 1
Trailing Characters
None 0 0
One 0 1
Two 1 0
Send Characters
Sendchars Define 2-Byte Sequence 1
Send Immediately After Sendchars 1