3-1
3: CoBox-Mini
Overview
The CoBox-Mini can be designed as an attachment to a PCB board. The serial interface is
accomplished via TTL connectors which include transmit, receive, and full handshaking.
UTP or AUI network interfaces can be utilized. The CoBox-Mini supports network speeds
of 10Mbps.
Both the length and orientation of the CoBox-Mini’s interface pins can be specified to fit
your product’s architectural requirements. The CoBox-Mini requires 5 volts DC of
regulated power with maximum current of 200mA for normal operation.
The CoBox-Mini’s well-developed IP firmware supports protocols such as ARP, UDP,
TCP, BOOTP, Telnet, ICMP, SNMP, DHCP, TFTP, and HTTP, as well as other custom
protocols. The CoBox-Mini also supports a variety of user-configurable options such as
buffer control and packetization, which make it easy to use in most applications.
Note: This manualdocumentsthe present version (Rev 2) of the CoBox-Mini.
This latest version of the CoBox-Mini is distinguished from the earlier
version by its dual TTL serial ports (CON1 and CON4). The earlier
version had one TTL serial port.
To Next Page
Loading...
Need help?
General