Network
E220 Series Cellular Router User Guide 120
Advanced Settings
Network > Load Balancing > Advanced Settings
This section details the same configuration as described in the earlier section but using a script and
without the need to configure individual webpages
A. Hotplug Script
Screen 10-37: Advance Configuration for Hotplug Script
Parameters Description
Hotplug Script Hotplug scripts is a Linux kernel program that is used when the
following two events occurs:
• Interface comes up
• Interface goes down
Hotplug is automatically loads the drivers and runs arbitrary scripts
based on events.
Table 10.2-11: Advance Configuration for Hotplug Script
To Next Page
Loading...