Services
E220 Series Cellular Router User Guide 160
B. Advanced Settings
Screen 11-2: Advanced Configurations for PPTP
Parameters Description
Bring up on boot Allows the WAN interface to be live after every reboot.
Bring up on boot for WAN interface is checked by default.
Use default gateway Click to configure a default gateway route.
None of the gateway routes are configured by default.
Use gateway metric Enter the gateway metric.
The default metric is 0.
Use DNS server advertised by
peer
Allows advertising the DNS server address.
Use DNS server advertised by peer for PPTP interface is checked
by default.
LCP echo failure threshold Presume peer to be dead after configured LCP echo failures. Use 0
to ignore failures
LCP echo interval This is time the router should wait before sending an echo request to
check whether the link is alive or not.
The LCP echo interval by default is 5 seconds.
Inactivity timeout The Router will wait for the LCP echo request response for the LCP
Echo interval defined after every attempt. It declares LCP link as
closed if it does not receive response after this defined period of
To Next Page
Loading...
Need help?
General