Services
E220 Series Cellular Router User Guide 174
D. General Settings
Parameters Description
Interface
Select the interface to configure PPTP:
• WAN
• WWAN
• 3G
• Auto
Selecting a particular interface will bind the L2TP tunnel
to that particular interaface. Selecting Auto means that
the L2TP tunnel will be created over an active interface
as defined in Load Balancer policies.
Address
Will display the IP address of the interface using which L2TP tunnel
has been created
LNS Server
Enter the DNS Name or Public IP Address of the VPN Server for
L2TP connection.
username
Enter the Username
password
Enter the Password
To Next Page
Loading...
Need help?
General