Status
E220 Series Cellular Router User Guide 35
Routes
Status > Routes
Screen 8-3: Routes Status
Parameters Description
ARP – ARP table provides information about the peripherals connected on each interface
IPv4 Address Displays the IPv4 Address.
MAC Address Displays MAC Address of the peripheral device.
Interface Displays the interface name connected to the peripheral device.
Active IPv4 Routes – Displays the active IPv4 network route information.
Network Displays the network Type used by the active IPv4 routes.
Target Displays the destination IPv4 Address.
IPv4 Gateway Displays the IPv4 Address Gateway used for traffic routing.
Metric Displays the metric assigned to the Interface.