Network
E220 Series Cellular Router User Guide 70
Parameters Description
Status Displays the following Interface details:
• Uptime
• MAC-Address
• RX
• TX
• IPv4
• IPv6
Actions Select the action to be taken for the Interface.
• Connect – Connects the interface or reconnects the
already connected interface
• Stop – Stops the Interface
• Edit – Click to edit the Interface.
Add VPN Interface Click to add and configure the virtual interfaces.
Note
• Adding a Virtual Interface may require complex
configuration modifications in load balancer settings. For
more details, please visit Lantronix Technical Support.
Global Network Options
IPv6 ULA-Prefix Displays the IPv6 ULA-Prefix
Network Watchdog
Enable Click to enable Network Watchdog.
Watchdog keeps a check on the connectivity of all WAN interfaces.
In absence of the connectivity resulting in Network down, the router
resets itself.
By default, the network watchdog is in disable mode.
Table 10.1-1: Interface Overview
To Next Page
Loading...
Need help?
General