Lantronix SLC 8000 Series User Manual

9: Device Ports
SLC™ 8000 Advanced Console Manager User Guide 220
continue
print("Detected prompt", devPrompt, ".")
# Strip characters not allowed in DP names
devPromptStrip = re.sub("[^0-9A-Za-z\._\-]", "", devPrompt)
devPromptComplete = devPromptStrip + "-" + str(devicePort)
pList.append(devPromptComplete)
p.terminate(True)
p.wait()
devicePort = devicePort + 1
# end of while devicePort <= numPorts:
# Connect to the SLC CLI and set the device port names
p=pexpect.spawn('clisession -U sysadmin')
loggedIn = False
while not loggedIn:
i = p.expect([pexpect.TIMEOUT, pexpect.EOF,
'Model Number: SLC80(\d*)\r\n', 'Model Number:
SLB882\r\n',
'(\[.*>)'], timeout=10)
if i == 0: # Timeout
print("Timeout waiting to login.")
p.terminate(True)
sys.exit(1)
elif i == 1: # EOF
print("Session unexpectedly terminated.")
p.terminate(True)
sys.exit(1)
elif i == 4: # prompt
loggedIn = True
devicePort = 1
while devicePort <= numPorts:
if skipPorts and devicePort >= 9 and devicePort <= 16:
devicePort = devicePort + 1
continue
if len(pList[devicePort - 1]) > 0:
# Detected a prompt; set it
print("Setting name on DP", devicePort, "to", pList[devicePort -
1], "...")
s = "set deviceport port " + str(devicePort) + " name " +
pList[devicePort - 1]
p.sendline(s)
i = p.expect([pexpect.TIMEOUT,
'Device Port settings successfully updated.\r\n'],
timeout=10)
if i == 0: # Timeout
print("Timeout waiting for response.")
devicePort = devicePort + 1
# Terminate the CLI session
p.sendline("logout")

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English