15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 366
Displays the status for all connected Sensorsoft devices and ignores the device port\nlist.
Note: The Sensorsoft lowtemp and hightemp settings are given in the scale specified by
the degrees setting.
Description
Sends commands to (or control) a device connected to an SLC device port over the serial port.
Note: Currently the only devices supported for this type of interaction are Sensorsoft
devices.
Device Port Commands
set deviceport port
Description
Sets the dialout password.
Syntax
set deviceport port <Device Port # or List or Name> <one or more device
port parameters>
Example: set deviceport port 2-5,6,12,15-16 baud 2400
Parameters
actiondelay <Action Delay>
actionrestart <Restart Delay>
assertdtr <enable|disable>
auth <pap|chap>
banner <Banner Text>
baud <300-230400>
breakseq <1-10 Chars>
bytethreshold <# of Characters>
calleridcmd <Modem Command String>
calleridlogging <enable| disable>
cbcptype <admin|user>
cbcpnocallback <enable|disable>
chapauth <chaphost|localusers>
chaphost <CHAP Host or User Name>
checkdsr <enable|disable>
closedsr <enable|disable>
connectedmsg <enable|disable>
databits <7|8>
device <none|sensorsoft|rpm>
detectname <enable|disable>
detecttokens <Name Detection Tokens>
dialbackdelay <PPP Dial-back Delay>
dialbacknumber <usernumber|Phone Number>
To Next Page
Loading...
