10: Remote Power Managers
SLC™ 8000 Advanced Console Manager User Guide 234
Figure 10-5 RPM Logs
Figure 10-6 RPM Environmental Log
RPMs - Add Device
The Add Device page assists the administrator with adding a new managed RPM to the SLC
configuration. With over 140 different vendors and nearly 1000 different models that are
supported, the key to ensuring the SLC can properly manage a PDU or UPS is selecting the right
model (with its associated driver) and any required driver options, especially for USB managed
devices. On the Devices > RPMs page, access the Device Ports > RPMs - Add Device page to
configure a new managed remote power manager (RPM) for the SLC configuration.
Note: The Device Ports > RPMs - Add Device page with the same functionality can also
be accessed through the Devices > Device Ports page.
To add a new managed RPM :
1. Click the Devices tab and select the RPMs option. Figure 10-1 shows the page that displays.
2. Click the Add Device link on the Devices > RPMs page. The following page displays.
To Next Page
Loading...
