Lantronix SLC 8000 Series User Manual

13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 317
order of the screens.
Note: The User Strings screen displays the 2 lines defined by the User Strings - Line 1
and Line 2 fields. By default, these user strings are blank.
4. Click Apply to save.
To configure the Keypad:
1. Enter the following fields.
2. Click Apply to save.
Administrative LCD/Keypad Commands
Go to Administrative Commands to view CLI commands which correspond to the web page entries
described above.
Banners
The Maintenance > Banners page allows the system administrator to customize text messages
that display to users.
To configure banner settings:
1. Click the Maintenance tab and select Banners option.
Figure 13-15 Maintenance > Banners
Keypad Locked Select this to lock out any input to the keypad. The default is for
the keypad to be unlocked.
Restore Factory Defaults Password /
Retype Password
Enter the 6 digit key sequence at the keypad to restore the SLC
unit to factory defaults. The default is 999999.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English