15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 415
Xmodem Commands
set xmodem repo
Syntax
set xmodem repo import <Xmodem File> via <ftp|sftp|scp>
host <IP Address or Name> login <User Login>
[path <Path to Xmodem File>]
set xmodem repo rename <Xmodem File> newfile <New Filename>
set xmodem repo delete <Xmodem File>
Description
Manages a repository of files that can be sent to or received from a device port with Xmodem,
Ymodem, or Zmodem. The maximum file size is 20 MB, and the maximum total repository size is
25 MB.
set xmodem send/receive
Syntax
set xmodem send <Device Port # or Name> file <Xmodem File>
protocol <xmodem|ymodem|zmodem> xfer <binary|ascii>
set xmodem receive <Device Port # or Name> [file <Xmodem File>]
protocol <xmodem|ymodem|zmodem> xfer <binary|ascii>
[overwrite <enable|disable>]
Description
Send or receive files with Xmodem, Ymodem or Zmodem (by default receive will not overwrite a
file in the repository with the same name).
show xmodem
Syntax
show xmodem
Description
Shows the Xmodem repository files.
To Next Page
Loading...
