Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 401
Description
Displays current service settings.
Site Commands
Configure a set of site-oriented modem parameters that can be activated by various modem-
related events (authentication, outbound network traffic for DOD connections, etc.). The site
parameters will override any parameters configured for the modem. To use sites with a modem,
enable 'usesites'. Sites can be used with the following modem states: dialin, dialback, cbcpserver,
dialondemand, dialin+ondemand, and dialback+ondemand.
set site add|edit
Syntax
set site add|edit <Site Name> [<parameters>]
Parameters
name <Site Name> (edit only)
deviceport <Device Port # or Name or none> dialoutnumber <Phone Number>
usbport <U1|U2> dialoutlogin <User Login>
internal modem allowdialback <enable|disable>
auth <pap|chap> dialbacknumber <Phone Number>
loginhost <User Login/CHAP Host> dialbackdelay <Dial-back Delay>
localipaddr <negotiate|IP Address> dialbackretries <1-10>
remoteipaddr <negotiate|IP Address> timeoutlogins <disable|1-30 minutes>
routeipaddr <IP Address> modemtimeout <disable|1-9999 secs>
routemask <Mask> restartdelay <PPP Restart Delay>
routegateway <Gateway> cbcpnocallback <enable|disable>
nat <enable|disable>
Set the site password and CHAP secret (any extra parameters will be ignored):
set site dialoutpassword <Site Name>
set site chapsecret <Site Name>
Deletes a site:
set site delete <Site Name>
show site <all|names|Site Name>
SLC Network Commands
set slcnetwork
Syntax
set slcnetwork <one or more parameters>

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English