11: Connections
SLC™ 8000 Advanced Console Manager User Guide 248
Connection Configuration
Note: These are advanced connection settings for specific applications. If the SLC 8000
advanced console manager is being used as a console or device server it is unlikely that
you will need any of the Connection settings described below.
To create a connection:
1. Click the Devices tab and select Connections. The following page displays:
Figure 11-6 Devices > Connections
2. For a device port, enter the following:
Outgoing
Connection
Timeout
Select to turn on or turn off the connection timeout:
No for no timeout
Yes for a timeout. Specify the number of seconds in the seconds field.
To Next Page
Loading...
