Lantronix SLC 8000 Series

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 355
Description
Enable or disable firmware and configuration updates via ConsoleFlow.
set cflow rebootafterupdate
Syntax
set cflow rebootafterupdate <enable|disable>
Description
Enable or disable reboots after firmware or configuration updates.
set cflow connection
Syntax
set cflow connection <cloud|onpremise> <one or more parameters>
Parameters
host <IP Address or Name>
port <TCP Port>
secureport <enable|disable>
validatecerts <enable|disable>
mqttstate <enable|disable>
mqtthost <IP Address or Name>
mqttport <TCP Port>
mqttsecurity <enable|disable>
projecttag <Project Tag>
Description
Configure ConsoleFlow Cloud or On-Premise settings.
set cflow devicename
Syntax
set cflow devicename <Device Name> description <Device Description>
Description
Configure the device name and description used for registration.
set cflow timeoutcli
Syntax
set cflow timeoutcli <1-1800 seconds>
set cflow timeoutdp <1-1800 seconds>