Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 381
tokendatadetect <enable|disable>
tokenstring <Regex String>
tokentrigger <bytecnt|charstr>
usblogging <enable|disable>
usbmaxfiles <Max # of Files>
usbmaxsize <Size in Bytes>
usbport <u1|u2|sd>
sysloglogging <enable|disable>
Description
Configures logging settings for one or more device ports.
Local logging must be enabled for a device port for the locallog commands to be executed. To
use the set locallog clear command, the user must have permission to clear port buffers
(see Chapter 12: User Authentication.)
Example
set deviceport port 2-5,6,12,15-16 locallogging enable
show locallog
Syntax
show locallog <Device Port # or Name> [bytes <Bytes To Display>]
[startbyte <Byte Index>]
Description
Displays a specific number of bytes of data for a device port. 1K is the default.
set locallog clear
Syntax
set locallog clear <Device Port # or Name>
Description
Clears the local log for a device port.
The locallog commands can only be executed for a device port if local logging is enabled for
the port. The set locallog clear command can only be executed if the user has permission
to clear port buffers (see Chapter 12: User Authentication).
set log clear modem
Syntax
set log clear modem

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English