Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 394
Description
Sends a command to control one or more outlets on an RPM.
Syntax
set rpm command <RPM Id or Name> device <reboot|shutdown>
Description
Sends a command to control an RPM device.
Syntax
set rpm command <RPM Id or Name> beeper <mute|enable|disable>
Description
Sends a command to control an RPM beeper.
set rpm delete
Syntax
set rpm delete <RPM Id or Name>
Description
Deletes an RPM.
set rpm driver
Syntax
set rpm driver <RPM Id or Name> action restart
set rpm driver <RPM Id or Name> action debug [level <1|2|3>]
set rpm driver <RPM Id or Name> action show
set rpm driver <RPM Id or Name> action viewoutput [email <Email Address>]
[display <head|tail>] [numlines <Number of Lines>]
Description
Control and debug the RPM driver if the driver is not properly communicating with the PDU or
UPS: restart the driver; restart the driver with debug output to a file; show the running driver; view
and email the driver debug output.
Note: Drivers running in debug mode will generate copious output and for disk space
reasons should not be left running in debug mode for long periods of time.
set rpm edit
Syntax
set rpm edit <RPM Id or Name> <one or more parameters>

Lantronix SLC 8000 Series Specifications

General

Model	SLC 8000 Series
Connectivity	Ethernet
Connectivity Technology	Wired
Protocols	SSH, Telnet, HTTP, HTTPS, SNMP
Dimensions	Varies by model
Power Input	100-240V AC
Operating Temperature	0°C to 50°C
Weight	Varies by model
Form Factor	Rack-mountable
Management	Web-based, CLI
Authentication Method	RADIUS, TACACS+
Power Supply	AC or DC
Switching Capacity	Not applicable
Forwarding Rate	Not applicable
MAC Address Table	Not applicable
Storage Temperature	-20°C to 70°C
Humidity	5% to 95% non-condensing
Ports	Varies by model (8, 16, 32, or 48 serial ports)